Default Port Mapping - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Default Port Mapping

The following table shows the default F_Port to N_Port maps that are automatically configured when
Access Gateway mode is enabled. All N_Ports have failover enabled and failback disabled.
Table 0-1
SilkWorm
Model
4012
4016
4020
4024
Access Gateway Administrator's Guide
Publication Number: 53-1000430-01
Access Gateway default F_Port to N_Port mapping
Total Ports N_Ports
12 8–11
16 10–15
20 0, 15–19
24 0, 17–23
F_Ports Mapping
0–7 0, 1 mapped to 8
2, 3 mapped to 9
4, 5 mapped to 10
6, 7 mapped to 11
0–9 0, 1 mapped to 10
2, 3 mapped to 11
4, 5 mapped to 12
6, 7 mapped to 13
8 mapped to 14
9 mapped to 15
1–14 1, 2 mapped to 0
3, 4 mapped to 15
5, 6, 7 mapped to 16
8, 9 mapped to port 17
10, 11 mapped to 18
12, 13, 14 mapped to 19
1–16 1, 2 mapped to 17
9, 10 mapped to 18
3, 4 mapped to 19
11, 12 mapped to 20
5, 6 mapped to 21
13, 14 mapped to 22
7, 8 mapped to 23
15, 16 mapped to 0
Appendix
A
A-1