Replacing Or Adding A New Hard Drive - D-Link DNS-323 - Network Storage Enclosure NAS Server User Manual

Section 3 - Configuration

Replacing or Adding a New Hard Drive

It is recommended that you backup your important files before replacing or adding a new hard drive to the DNS-323.
Replacing a Hard Drive:
Please make sure the power is off before replacing a hard drive. After you install the new drive, turn on the DNS-323
and then connect to the Web UI. The DNS-323 will prompt you to format the new drive (Standard, RAID 1 mode) or
both drives (JBOD, RAID 0 mode).
Adding a New Hard Drive:
The DNS-323 is able to work with one single hard drive under Standard mode. Please make sure the power is off before
installing a second hard drive.
After you install the new drive, turn on the DNS-323 and then connect to the Web UI. The DNS-323 will prompt you
to format the new drive.
Note: Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before
formatting a hard drive.
D-Link DNS-33 User Manual