Section - Installation
This section provides unpacking and installation information for the DNS-323. Open the shipping carton for the
DNS-323 and carefully unpack its contents. To install the DNS-323 on your local network, refer to the steps below:
1. Access the drive bays by sliding the faceplate
up until it unlatches from the device.
2. Once the faceplate is unlatched, pull it off the
device, exposing the drive bays.
D-Link DNS-33 User Manual
Installation
Hardware Setup
10
Need help?
Do you have a question about the DNS-323 - Network Storage Enclosure NAS Server and is the answer not in the manual?
Questions and answers