Printing Iron-On Transfers - Lexmark 16M0497 - Z 55se Color Jetprinter Inkjet Printer User Manual

Lexmark Z55
Printer overview
Basic printing
Printing ideas
Maintenance
Troubleshooting
Notices
Index
Using this
Guide...

Printing iron-on transfers

You can load up to 25 iron-on transfers, depending on the thickness of the iron-on transfers.
You may want to print your image on plain paper before printing it on an iron-on transfer. This
ensures you do not waste iron-on transfers perfecting the image you would like to print. When
the image prints to your satisfaction, load the iron-on transfers.
Step 1: Load the iron-on transfers
•
If your transfers came with instructions, read them carefully.
•
Make sure your transfers are not used or damaged.
•
Make sure the print (blank) side is facing you.
•
Load the iron-on transfers vertically against the right side of
the paper support.
Note: Do not push the iron-on transfers too far into the printer.
•
Squeeze and slide the paper guide to the left edge of the iron-on transfers.
www.lexmark.com
Printing ideas 54