Western Digital WDBAAF6400EBK - My Book Essential User Manual page 16

6. After password protecting or registering your drive, click Continue to close the
WD SmartWare initial Drive Settings screen and display the WD SmartWare Home
screen (Figure 8).
This completes the getting started procedure after selecting Install WD SmartWare
and skipping the backup.
7. After password protecting or registering your drive, click Finish to close the drive
management initial Drive Settings screen.
This completes the getting started procedure after selecting Install Drive Settings.
In this case:
• Opening the WD SmartWare software displays the drive management Home
screen (see Figure 9 on page 12) with only the Settings tab for performing all
drive management functions (see "Customizing Your Drive Settings" on page 35).
• Clicking the Settings tab displays the drive management Drive Settings screen
with a Preferences button that you can use to enable the Backup and Retrieve
functions (see Figure 17 on page 27 and "Enabling the Backup and Retrieve
Functions" on page 40).
Figure 8. WD SmartWare Home Screen
CONNECTING THE DRIVE AND GETTING STARTED – 11
MY BOOK ESSENTIAL
USER MANUAL