Maxtor OneTouch User Manual page 24

How to reset the OneTouch button:
If you ever want to set your button back to launch your
OneTouch script, it's very easy.
1. Open the Maxtor OneTouch Settings utility.
Once it opens, you should see your drive listed in the
lower part of this window.
2. Make sure your OneTouch drive is selected.
3
3. Click the Default Settings button.
This sets the button back to it's original settings
4. Close the Maxtor OneTouch Settings utility.
Using Power Management
To minimize the power consumption of your drive while your
computer is on, you can take advantage of the power management
feature supported with the Energy Saver control panel on
your Macintosh.
The power management feature sets the drive to automatically use
less power after a predetermined period of time of inactivity. This is
sometimes referred to as spin down since the drive's internal
mechanical disks stop spinning. When the drive is in the spin down
mode, one of the blue power lights will remain on and the other
one will blink.
20
Power Management Settings
OS 9
1. Under the Apple menu, select Control Panels.
The Control Panels folder will open.
2. Find and open the Energy Saver control panel.
The Energy Saver window will open, and the
Sleep Setup settings should be displayed.
3. Make sure the checkbox for 'Separate timing for hard
disk sleep' is checked.
The slider at the bottom of the screen controls the time
period of inactivity before the all system hard drives will
go to sleep. It is possible to choose as short as 10
minutes and as long as 60 minutes. You can also set it to
never go to sleep.
4. Select a time period using the slider in the bottom of the
window.
5. Close the Energy Saver control panel.
OS X
1. Under the Apple menu, select System Preferences.
The System Preferences window will open.
2. Click the Energy Saver icon (a light bulb).
The Energy Saver panel will open, and the
Sleep settings should be displayed.
3. Make sure the checkbox for 'Put the hard disk to
sleep when possible' is checked.