Maxtor OneTouch User Manual page 15

2. Plug the other end of the FireWire cable into either of the
available FireWire ports on the back of the drive.
FireWire Ports
Figure 6. Connecting to a FireWire port
3. After a short time, your new drive will appear on the desktop of
your Macintosh.
The installation is complete and your Maxtor OneTouch drive is
ready to use!
If you did the Full Installation, including Retrospect Express, we
encourage you to proceed to the next section to set up the Maxtor
OneTouch feature for easy, automated backup of your important
files, anytime, at the touch of a button!
Macintosh OS 9: Setting Up the
Maxtor OneTouch Feature
Once the drive is recognized by your computer, you can set up the
Maxtor OneTouch feature to automatically make a backup copy of
your selected files each time you press the OneTouch button.
Before you begin, make sure the Maxtor Install CD is NOT
in your CD-ROM drive.
To set up the Maxtor OneTouch button feature
1. Push the button on the front of your drive.
A window should appear: 'Would you like to register
Retrospect Express now?'
2. Choose either Register Now, Register Later or
FireWire
Ports Already Registered.
If you choose Register Now, go to the next step.
If you chose Register Later or Already Registered,
Retrospect Express will open. Go directly to Step 4 -
Maxtor OneTouch Setup.
3. Enter the required information on the form.
• Click Email to register via email
• Click Print to register via mail
• Click Register Later if you do not want to register at this time.
By registering
receiving product updates, special offers, and important
1. Your registration information is collected and maintained according to
the Dantz and Maxtor privacy policies located on their respective
web sites.
If you choose to E-mail the information, make sure you are
connected to the Internet.
If you choose to print the information, you can fax the form to Dantz
Corporation at +1 925 253 9099.
1
your new drive, you will have the option of
Installing Your Drive
2
11