Kenmore 1700 - 6 Gallon Humidifier Use And Care Manual page 5

Positioning the Unit
The humidifier should be positioned with
the back (cord exit side) and sides, at
least 2 inches away from the wall, Air
needs to enter through all of the louvers
in the housing assembly in order for the
humidifier to operate at peak efficiency.
NOTE: Be sure humidistat (located
approximately 4 inches outside humidifier
body on power cord) is free from
obstruction and away from any hot air
register.
NOTE: Due to release of cool, moist air from humidifier, it is best to direct air
away from thermostat and hot air registers and to position humidifiers next to an
inside watl_ Unit should not be placed where cold air from outside walls or warm
air from a hot air register blows directly on it,
Step 2. Electrical Hook-Up
Locate nearest t20V AC_ wall socket in the location desired, preferably on
inside wall. With the humidifier in the desired location, route the electrical cord
safely so no one will trip or upset the humidifier.
Plug in the electrical cord
L
WARNING: To reduce the risk of fire or shock hazard, only plug humidifier l
into a 120V A.C_ outlet. Do not use extension cords.
J
To reduce the risk of electrical shock, this
humidifier has a polarized plug (one blade
is wider than the other), This plug will fit in
a polarized outlet only one way,
If the plug does not fit fully in the outlet,
reverse plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not change the plug in any way
5