Day Limited Warranty - RocketFish DJ Hero RF-GSL010 Quick Setup Manual

Quick setup guide (english)

Enlarged version

6 Insert a top cradle bar into one of the shorter arms on the center crossbar.

7 Align the holes on the top cradle bar and crossbar, then insert a bolt clip

through the holes.

8 Repeat Steps 6 and 7 to attach the other top cradle bar.

9 Snap the top supports onto the cradle bars. Make sure that the rounded

clips on the supports are on top of the cradle bars.

09-0854_RF-GSL010_DJ Hero Stand_2 2

10 Slide out the pole on the base bar until it locks into place.

11 Insert the base bar into the stand feet until it locks into place.

12 Place the turntable on the stand.

Specifi cations

• Compatible with PlayStation®2, PlayStation®3, Xbox 360®, and Wii™

• Stand dimensions: 26.57 × 19.09 × 29.92 (low) / 35.83 (high) inches

(67.5 × 48.5 × 76 (low) / 91 (high) cm)

• Individual product weight: 7.34 lbs. (3.345 kg)

• Weight limit: approximately 15 lbs. (6.8 kg)

90-day limited warranty

Visit www.rocketfi shproducts.com for details.

Registered in some countries. All other products and brand names are trademarks of

their respective owners.

Locked

CAUTION: This stand is intended only

for use with a DJ Hero™ turntable

accessory. Using the stand for other products or

objects, particularly those weighing more than

15 pounds, may result in instability, which may

cause injury. When the turntable is on the stand,

do not lift the stand by the posts.

ENGLISH 09-0854

9/18/2009 12:21:20 PM