Bushnell Scout 1000 Rangefinder Owner's Manual page 10

Once in this mode, press the POWER button to turn the unit on. Next, align the aiming circle onto the
object (i.e. deer) that you want distance to. Next, press and hold the POWER button and move the laser
slowly over the deer until crosshairs surround the BullsEye indicator. If the laser beam recognized more
than one object (i.e. deer and background trees), distance of the closer object (i.e. deer) will be displayed
and crosshairs will surround the BullsEye indicator informing the user that distance to the closer object
is being displayed in the LCD (Figure 1). There may be times when only the laser beam only sees one
object in its path. In this case, the distance will be displayed, but because more than one object was not
acquired, crosshairs will not surround the BullsEye indicator.
Figure 1
10