Ports On The Cisco Mds 9134 Switch - Cisco MDS9120 - MDS 9120 Multilayer Fabric Switch Installation Manual

Cisco MDS 9100 Series Ports
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
If a port or optical transceiver fails, you can disable that licensed port and assign the port license to
Note
another unused available port for recovery resiliency.You can re-assign the licensed ports to any of the
48 physical ports (up to the permitted number of licensed ports).
Table 1-1
Ports
Front panel fc1/33–36
Front panel fc1/29–32
Front panel fc1/25–28
Front panel fc1/45–48
Front panel fc1/41–44
Front panel fc1/37–40
Front panel fc1/9–12
Front panel fc1/5–8
Front panel fc1/1–4
Front panel fc1/21–24
Front panel fc1/17–20
Front panel fc1/13–16
All 48 8-Gbps ports can operate at line rate concurrently.

Ports on the Cisco MDS 9134 Switch

The Cisco MDS 9134 Switch provides up to 32 autosensing and autonegotiating Fibre Channel ports
capable of speeds of 1, 2, and 4 Gbps. The first 24 ports are licensed by default. On-Demand Port
Activation Licensing allows expansion to 32 ports, with additional ports available as an 8-port group.
The Cisco MDS 9134 Switch also offers two 10-Gbps ports.
port groups.
Table 1-2
Ports
Front panel fc1/1–4
Front panel fc1/5–8
Front panel fc1/9–12
Front panel fc1/13–16
Front panel fc1/17–20
Front panel fc1/21–24
Front panel fc1/25–28
Cisco MDS 9100 Series Hardware Installation Guide
1-10
Port Group Mapping on the Cisco MDS 9148 Switch
Port Group Mapping on the Cisco MDS 9134 Switch
Chapter 1
Port Group
Port group 0
Port group 1
Port group 2
Port group 3
Port group 4
Port group 5
Port group 6
Port group 7
Port group 8
Port group 9
Port group 10
Port group 11
Table 1-2 shows the mapping of ports to
Port Group
Port group 0
Port group 1
Port group 2
Port group 3
Port group 4
Port group 5
Port group 6
Product Overview
OL-21514-01