Removing The Transportation Damper; Using The Power Switch Cover; Installing The Paper Rolls - Epson U950 - TM B/W Dot-matrix Printer User Manual

English

Removing the Transportation Damper

The printer is protected during
shipping by a transportation damper
that you must remove before turning
on the printer.
Pull the damper out, as shown in
illustration
Note:
Before shipping the printer, reinstall the
transportation damper.

Using the Power Switch Cover

WARNING:
If an accident occurs with the power
switch cover attached, unplug the
power cord immediately. Continued
use may cause fire.
The enclosed power switch cover
ensures that the power switch is not
pressed accidentally. To use this
cover, install it as shown in
illustration

Installing the Paper Rolls

Note:
Use only paper rolls that meet the specifications.
1. Make sure the leading edge of
the paper is straight.
2. Turn on the printer and open
the printer cover.
3. Insert paper rolls on both the
receipt and journal sides of
the printer, as shown in
illustration
is on the right in this
illustration.)
4 TM-U950 User's Manual
.
1
.
2
. (The journal roll
3
1
2
3
✔
Correct
✖
Wrong