Chapter 4 Setting The Dip Switches - Epson U300PC - TM B/W Dot-matrix Printer User Manual

Chapter 4 Setting the DIP Switches

Finding the DIP switches
As shown in the illustration below, the DIP switches are located on the bottom of
the printer. The DIP switches are used to set the printer to perform various func-
tions
The TM-U300C/U300D DIP switches are numbered SW-1 to SW-10 and the
TM-U300PC/U300PD DIP switches are numbered SW-1 to SW-8, from left to right
as shown in figure below.
The tables on the following pages describes the DIP switch functions.
■ Setting the DIP switches
Follow these steps when changing DIP switch settings:
➀ Turn the printer power switch off.
➁ Flip the DIP switches using tweezers or another narrow-ended tool.
Switches are on when up and off when down in the figure below.
➂ The new setting takes effect when you turn on the printer.
NOTES:
Always change DIP switch settings when the printer is turned off.
Changes made with the power on have no effect until you turn the printer
off and then on again.
DIP Switches
TM-U300PC/U300PD
23