Emc And Safety Standards Applied; Fcc Compliance Statement For American Users; For Canadian Users - Epson U300PC - TM B/W Dot-matrix Printer User Manual

EMC and Safety Standards Applied

Printer
Product Name: TM-U300C/D, TM-U300PC/PD
Model Name: M51JC/D, M51PC/PD
The following standards are applied only to the
printers that are so labeled. (EMC is tested using
the Epson power supplies.)
Europe: CE marking
North America: EMI:
Japan: EMI:
Oceania: EMC: AS/NZS CSIPR22 Class B
Taiwan: BSMI: EMC: CNS13438
WARNING
The connection of a non-shielded printer interface
cable to this printer will invalidate the EMC
standards of this device.
You are cautioned that changes or modifications
not expressly approved by SEIKO EPSON
Corporation could void your authority to operate
the equipment.

FCC Compliance Statement For American Users

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.

For Canadian Users

This Class A digital apparatus complies with Canadian ICES-003.
FCC/ICES-003 Class A
VCCI Class A
Safety: CNS14236
A
ng
Japan:
CE Marking
The printer conforms to the following Directives
and Norms:
Directive 89/336/EEC EN 55022 Class B
i
English
C22.2 No. 950
Safety: Electrical Appliance and
Material Control Law of
Japan
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11