Loading - Maytag MDB6701AWW - BI DW 5LVL SANI ESTAR Use & Care Manual

Loading
Adjustable Rack
[select models)
The Adjustable Upper Rack (select models) can be
raised or lowered to accommodate taller plates,
platters, pans, etc. optimizing useable space in both
upper and lower racks. Full size dinner plates can be
loaded in the upper rack if it is in the lower position.
Always adjust the upper rack before loading.
To lower the rack:
1. Pull the rack fully out.
Adjusters
2. Place thumbs on
each lever on
the adjuster
while holding
rack with hands.
3. Press down on
the levers with
thumbs and
push rack down. The rack will come to a stop when
it is in position.
To raise the rack:
1. Pull the rack fully out.
2. Place hands on both sides and lift up until rack
comes to a stop and latches in place.
Notes
• The dishwasher will not
operate correctly if the
wash arm is not aligned
with one of the water
inlet holes on back wall
of the dishwasher.
• The left and right side adjusters on the racks
must both be fully in the upward or downward
position for proper connection.
Removing the Upper Rack
The rack can be removed when tall or oversized items
need to be loaded into the lower rack. Unload the
rack before removing it from the dishwasher.
To remove rack with tab-lock rack stops:
1. Roll the rack '/3to '/2of the way out.
2. Locate the rack stops at the end of each track.
Squeeze the tab in the middle of the rack stop and
pull the rack stop straight out. Take care to support
the rack while removing the rack stops.
3. Roll the rack all
the way out of the
track and remove
from the
dishwasher.
To replace:
Style may vary by model
1. Replace the
dishwasher rack by guiding the
wheels into the tracks.
Tab Lock
Rack Stop
2. Push each rack stop squarely into the end of the
track until the catch pops into the small hole on the
side of the track.
6