Settings - Asko D5424 Operating Instructions Manual

Settings

Do as follows to open the settings menu:
1. Turn off the dishwasher using the main power switch. Wait about five seconds.
2. Then press the main power switch again. Wait until the numbers appear in the right-hand display
before continuing to the next step.
3. Within five seconds, press and hold the Program selector (wait for the audible signal confirming the
+
PROG PROG
button press) and then immediately press the Long dry button without releasing the Program selector.
4. Keep the buttons pressed until the symbols for the Daily wash and Rinse & Hold programs start to
flash.
TIP!
Be sure to press right on the symbols, so as not to inadvertently activate any other button. Try
again if you fail to open the settings menu the first time.
P R O G
You can now adjust the following settings:
Button Options
press
(Off)
(On)
Press Start to save the setting value and continue to the next setting.
If you do not want to change any other settings, keep pressing Start to step through the entire settings
menu.
Press to save the setting value and continue
to the next setting.
START START
Current setting.
Display
STOP
Current setting value.
Press to browse between setting values.
Settings
Child lock
(button lock)
Customer Care Center
1-800-898-1879
www.askousa.com
Description
You can activate the child lock (button lock)
option to prevent children from starting the
dishwasher.
Press the High temperature and Long dry
buttons simultaneously to temporarily deacti-
vate the button lock when you want to start
the dishwasher. The button lock is automati-
cally reactivated after 2 minutes.
17