Energy Star Compliance - Dell OptiPlex E1 Reference And Installation Manual

2 Dell OptiPlex E1 Managed PC Reference and Installation Guide
connectors
card-edge, 7-4
CD-ROM audio interface, 6-1
chassis intrusion switch, 6-1
control panel, 6-1
diskette/tape drive interface, 6-1
EIDE interface, 6-1
expansion-card, 6-3
hard-disk drive LED, 6-3
header, 7-4
keyboard, 5-7, 6-1
list of, 5-10
microprocessor fan, 6-1
mouse, 5-7, 6-1
multimedia connector, 6-1
NIC, 4-2, 5-7, 6-1
parallel port, 5-7, 6-1
power input, 6-1
riser board, 6-1
SEC cartridge, 6-1
serial port, 4-2, 5-7, 6-1
USB, 5-7, 6-1
video, 5-7, 6-1
control panel connector, 6-1
cover
removing and replacing, 5-2
CPU Speed category, 2-9
DC power cables, 5-5, 7-3
Dell OpenManage program, 1-6
Desktop Management Interface. See
DMI
diagnosing problems, 1-14
diagnostics
system, 1-4
DIMMs
about, 6-6
capacities supported, 1-1
installing, 6-6, 6-9
DIMMs (continued)
removing, 6-9
sockets, 6-1
Diskette Drive A and Diskette Drive B
categories, 2-5
Diskette Drive A: category, 2-8
diskette drives
connecting, 7-3, 7-4
interface connector, 6-1
turning off integrated controller, 2-11
types, sizes, and capacities, 2-5
Diskette Interface category, 2-11
diskette/tape drive interface connector,
6-1
Display Power Management Signaling.
See DPMS
DMI, 1-5
DPMS and power management, 2-14
drive bays
installing drives, 7-5
drivers for integrated devices, 4-1
drives
cables, 7-3
connecting to power, 7-3
formatting, 7-13
front-panel inserts, 7-2
installing, 7-5
location in chassis, 7-1
partitioning, 7-13
types supported, A-2
drive-type numbers, 2-6
dual in-line memory modules. See
DIMMs
EIDE hard-disk drives
disabling the built-in interface, 2-11
drive-type parameters, 2-7

Energy Star compliance, 1-11

formatting, 7-13