Heatsink Fan - HP dx7400 - Microtower PC Service & Reference Manual
Service reference guide - hp compaq dx7400 business pc
Hide thumbs
Also See for dx7400 - Microtower PC:
- Troubleshooting manual (69 pages) ,
- Hardware reference manual (32 pages) ,
- Utility manual (19 pages)
Table of Contents
Advertisement
Heatsink Fan
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the heatsink
4.
Disconnect the heatsink fan cable from the system board.
5.
Remove the four screws that secure the fan to the front of the heatsink (1), and then remove the
fan from the heatsink (2).
To install the heatsink fan, reverse the removal procedure.
110 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
(Preparation for Disassembly on page
(Access Panel on page
(Heatsink on page
109).
88).
87).
Advertisement
Table of Contents
