Computer Setup-Boot - HP dx7400 - Microtower PC Service & Reference Manual

Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-5 Computer Setup—Boot
Option
Device Boot Disabling
F9 Boot Menu
F10 Setup Prompting
F11 Recovery
Prompting
F12 Boot from LAN
Prompting
Removable Device
Boot Seq.
Hard Disk Boot Priority Allows you to specify the order of attached hard drive devices (such as USB HDD storage, USB2
Optical Drive Boot
Seq.
Network Boot Seq.
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Set Supervisor
Password
Set User Password
Description
Allows disabling of bootable device groups. Choose from:
●
None
●
USB
● Internal ODD
●
Internal FDD
● USB+ODD+FDD
Disables/enables F9 Boot Menu.
Disables/enables on screen F10 prompt
Disables/enables on screen F11 prompt
Disables/enables on screen F12 prompt
Allows you to specify the order of attached removable devices (such as Floppy Discs or USB FDD).
The first drive in the order has priority in the boot sequence and is recognized as drive A.
Drive Key, or USB flash media). The first drive in the order has priority in the boot sequence and is
recognized as drive C (if any devices are attached).
Allows you to specify the order in which attached optical drives (including USB ODD) are checked
for a bootable operating system image.
Allows you to specify the order in which network devices (including UP NIC cards) are checked for
a bootable operating system image.
Allows you to specify which devices will boot first, second, third, and fourth or to disable any of the
four:
●
Removable
●
Hard Disk
●
CDROM
● Network
●
Disabled
NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system
has started.
Allows you to establish a password to control access to Computer Setup.
Allows you to establish a password to control access to the computer. (Supervisor password must
be set before you can set a User password.)
Computer Setup (F10) Utilities 9