Type 3 Battery Holder - HP dx7400 - Microtower PC Service & Reference Manual
Service reference guide - hp compaq dx7400 business pc
Hide thumbs
Also See for dx7400 - Microtower PC:
- Troubleshooting manual (69 pages) ,
- Hardware reference manual (32 pages) ,
- Utility manual (19 pages)
Table of Contents
Advertisement
4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time, your passwords, and any special system setups, using Computer Setup.
Refer to the Computer Setup (F10) Utility Guide.
Type 3 Battery Holder
1.
Pull back on the clip (1) that holds the battery in place, then remove the battery (2).
2.
Insert the new battery and position the clip back in place.
3.
Replace the computer access panel.
4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time, your passwords, and any special system setups, using Computer Setup.
Refer to the Computer Setup (F10) Utility Guide.
Battery 117
Advertisement
Table of Contents
