Water Adjustment; Test Points - Whirlpool R-106 Training Manual

Clockwise decreases
Counterclockwise increases
¾ turn = 10cc
Do not adjust more than 1 turn
Note: Check all possibilities that
could cause a short or long fill
before making a fill adjustment
Modular
Water Fill Adjustment
The fill level is adjustable by turning a screw (or knob on some models) on the side of
the icemaker module. Turning the screw clockwise reduces the fill; turning the screw
counter-clockwise will increase the fill.
Do not turn the screw (or knob) more than one full revolution in either direction or
damage to module could occur!
There are test points identified by embossments on the front.

Water Adjustment

Adjustment Window

Test Points

N N
V V
L L
T T
15
Adjustment Screw
Factory setting small
hole centered in window
M M
H H
Modular