HP dx2080 - Microtower PC Quickspecs page 5

Quick Specs
System Details
Intel Celeron D
Processor
Chassis
Unit Environment and
Operating Conditions
Rev 1.0 July 2007
CPU Package
Front Side Bus Speed
Cache Memory
Coprocessor
CPU Socket Type/Number Socket T
CPU Package
Front Side Bus Speed
Cache Memory
Front Panel
Cooling Solutions
Supported
Slots Supported
Front I/O
Rear I/O
Drive Bays
Power Supply
General Unit Operating Guidelines
Keep the computer away from excessive moisture, direct moisture and the extremes of heat and
cold, to ensure that unit is operated within the specified operating range.
Leave a 10.2 cm (4 in) clearance on all vented sides of the computer to permit the required
airflow.
Never restrict airflow into the computer by blocking any vents or air intakes.
Do not stack computers on top of each other or place computers so near each other that they are
subject to each other's re-circulated or preheated air.
Occasionally clean the air vents on the front, back, and any other vented side of the computer.
Lint, dust and other foreign matter can block the vents and limit the airflow.
If the computer is to be operated within a separate enclosure, intake and exhaust ventilation
must be provided on the enclosure, and the same operating guidelines listed above will still
apply.
Temperature Range
Relative Humidity
HP Compaq dx2080 Microtower Business PC
LGA775
533/800MHz
1-MB L2 /2 MB /4 MB Advanced Transfer –depending on CPU
Integrated
LGA775 socket
LGA 775
533-MHz
256-KB /512 KB L2 Advanced Transfer Cache
Power button
Power On LED
HDD Activity LED
Power Supply Fan
Active heat sink fan (variable speed)
System fan
Two PCI & One x1 PCIe expansion slots
Two (2) USB 2.0 ports
Two (2) Front Audio ports (1 Headphone, 1 MIC)
Standard Micro ATX I/O connectors, including four (4 ) USB 2.0 ports
Two (2) 5-1/4" external
Two (2) 3-1/2" external
Two (2) 3-1/2" internal
300-watt ATX Power Supply –non-PFC
Operating Temperature: (0°C to 45 ° C)
Non-operating Temperature: (-30° to 60° C)
Operating Humidity: 10% to 95% (non-condensing at ambient)
Non-operating Humidity: 5% to 95% (non-condensing at ambient)