Vizio VO22LFHDTV10A User Manual page 32

b. The Tuner screen will be
displayed; default choice is
Antenna. If you are using Cable,
press the
CABLE.
Press the
to go to the next screen.
c. The Channel Scan screen will be
displayed; default choice is Scan.
Press the
control to commence the search
for available channels to be
stored into memory.
If you do not want to scan for
channels at this time, press the
LAST key on the remote control.
Note: If you select to skip this step by pressing the LAST key, next time that you decide to complete this
procedure, you will need to select the TV as input (through the Input key) and then go through the Menu
option, and select the Tuner setup to get the option of scanning the channels again.
d. The screen will now change to
show the progress of the search
for Analog (NTSC) and Digital
(ATSC) channels.
Note: DTV digital broadcast is not available in all
areas. Refer to www.antennaweb.org
information about availability in your area, type of
antenna and in which direction to point your
antenna. The channel availability through cable
depends upon which channels your cable operator
supplies in Clear QAM; consult your cable
operator for more information.
Version 9/9/2008
button to highlight
button on the remote
button on the remote
for
www.VIZIO.com
VIZIO VO22L FHDTV10A User Manual
32