Installation - Acer T232HL User Manual

User manual
Hide thumbs Also See for T232HL:
Table of Contents

Advertisement

INSTALLATION

To install the monitor to your host system, please follow the steps as given
below:
Steps
1. 1-1
Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2
Connect Digital Cable (Only Dual-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the
monitor and connect the other end to the computer's port.
1-3
Connect HDMI Cable (Only HDMI-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
2. 2-1
Connect the USB Cable(Optional)
2-2 Connect the USB 3.0 cable to port for fast charge.
2-3 Connect the USB 3.0 cable to port.
3.Connect the Audio Cable(Only Audio-Input Model)(Optional)
4. Connect
power adapter and power cord
Connect the pow
a properly grounded AC outlet.
5. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
6. If the monitor still does not function properly, please refer to the
troubleshooting section to diagnose the problem.
er adapter and power cord
4
4
3
to the monitor, then to
2-2
USB3.0 port
-supporting fast charge
2-3
USB3.0 port
DVI
VGA
HDMI
USB
1-3
1-2
1-1
2-1
2-3 2-2
EN-12
3
2-1
1-1
1-2
1-3
DVI
VGA
USB
HDMI

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T232hl

Table of Contents