Download  Print this page

Acer T232HL User Manual

User manual
Hide thumbs

Advertisement

TABLE OF CONTENTS

Special notes on LCD monitors .................................................. 1
Information for your safety and comfort .................................. 2
Unpacking ................................................................................... 5
Screen position adjustment ........................................................ 6
Connecting the power cord ....................................................... 7
Safety precaution ....................................................................... 7
Cleaning your monitor ............................................................... 7
Power saving ............................................................................... 8
DDC .............................................................................................. 8
Connector Pin Assignment ......................................................... 9
Standard Timing Table..................................................................11
Installation.....................................................................................12
User controls..................................................................................13
Troubleshooting............................................................................19

Advertisement

loading

  Related Manuals for Acer T232HL

  Summary of Contents for Acer T232HL

  • Page 1: Table Of Contents

    TABLE OF CONTENTS Special notes on LCD monitors ..........1 Information for your safety and comfort ........2 Unpacking ................... 5 Screen position adjustment ............6 Connecting the power cord ............7 Safety precaution ............... 7 Cleaning your monitor ............... 7 Power saving ................
  • Page 2: Special Notes On Lcd Monitors

    SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES · Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
  • Page 3: Information For Your Safety And Comfort

    Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. CAUTION for accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible.
  • Page 4: Product Servicing

    Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service person- nel when: •...
  • Page 5: Taking Care Of Your Vision

    • take short rests to relax your neck and shoulders • avoid tensing your muscles or shrugging your shoulders • install the external display, keyboard and mouse properly and within comfort able reach • if you view your monitor more than your documents, place the display at the center of your desk to minimize neck strain Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room...
  • Page 6: Unpacking

    UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. · · · LCD Monitor Power Adapter AC Power Cord ·...
  • Page 7: Screen Position Adjustment

    SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can be adjusted 8 degrees to 60 degrees up as indicated by arrow below.
  • Page 8: Connecting The Power Cord

    CONNECTING THE POWER CORD · Check first to make sure that the power cord you use is the correct type required for your area. · This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. ·...
  • Page 9: Power Saving

    Power saving The monitor will be driven into Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. State Light Blue Power Saving Amber Mode The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated.
  • Page 10: Connector Pin Assignment

    CONNECTOR PIN ASSIGNMENT 15-Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION Green Logic Ground Blue Monitor Ground Monitor Ground DDC-Serial Data Self test H-Sync R-Ground V-Sync G-Ground DDC-Serial Clock B-Ground 24-Pin Color Display Signal Cable* Meaning Meaning TMDS Data2- TMDS Data2+ +5V Power...
  • Page 11: Pin Color Display Signal Cable

    19-pin Color Display Signal Cable* PIN No. Description PIN No. Description TMDS Data2+ TMDS Data2 Shield TMDS Data2– TMDS Data1+ TMDS Data1 Shield TMDS Data1– TMDS Data0+ TMDS Data0 Shield TMDS Data0– TMDS Clock+ HDMI_DET TMDS Clock– Reserved (N.C. on device) Reserved (N.C.
  • Page 12: Standard Timing Table

    Standard Timing Table Mode Resolution 640x480 640x480 66.66 VESA 720x400 SVGA 800x600 SVGA 800x600 1024x768 1024x768 VESA 1152x864 SXGA 1280x1024 VESA 1280x WXGA 1280x800 WXGA+ 1440x900 WSXGA 1680x1050 UXGA 1920x1080 EN-11...
  • Page 13: Installation

    INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. Connect Digital Cable (Only Dual-Input Model) a.
  • Page 14: User Controls

    USER CONTROLS Power Switch / Power LED: To turn the monitor ON or OFF. M E N U Lights up to indicate the power is turned ON. I N P U T Using the Shortcut Menu A U T O Press the function button to open the shortcut menu.
  • Page 15: Operation Instructions

    Acer eColor Management Operation instructions Step 1: Press “ “ Key to open the Acer eColor Manage- ment OSD and access the scenario modes Step 2: Press “ “ or “ ” to select the mode Step 3: Press “ Exit “ Key to confirm the mode and run Auto Adjust.
  • Page 16: Adjusting The Picture Quality

    Adjusting the OSD settings -------------------------------------------------------------------- Note: The following content is for general reference only. Actual product specifications may vary. The OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD timeout and general settings.
  • Page 17 Adjusting the OSD Timeout 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust. EN-16...
  • Page 18: Adjusting The Setting

    Adjusting the setting 1 Press the MENU key to bring up the OSD. 2 Using the / keys, select Setting from the OSD. Then navigate to the feature you wish to adjust. Use the to move to the Sub-menu. 3 The Setting menu can be used to adjust the screen Menu Language and other important settings.
  • Page 19: Product Information

    Product information 1 Press the MENU key to bring up the OSD. 2 Using the keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. EN-18...
  • Page 20: Troubleshooting

    TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the trouble- shooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status Remedy LED ON · Using OSD, adjust brightness and contrast to maximum or reset to their default settings.
  • Page 21 (DVI/HDMI Mode) Problems Current Status Remedy LED ON · Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF · Check the power switch. · Check if AC power cord is properly No Picture connected to the monitor.
  • Page 22: Declaration Of Conformity

    Trade Name: Acer T232HL Model Number: T232HL xxxxxx SKU Number: (“ x” = 0~9, a ~ z, A ~ Z, or blank) Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements.
  • Page 23: Federal Communications Commission

    The following local Manufacturer /Importer is responsible for this declaration: Product: LCD Monitor T232HL Model Number: T232HL SKU Number: xxxxxx (“x” = 0~9, a ~ z, A ~ Z or Blank)

This manual is also suitable for:

T232hl