Insignia IS-TV040928 User Manual page 4

IS-TV040928 27" HD-Ready TV
P
OWER CORD PROTECTION
Route power supply cords so they are not likely to be walked on or
pinched by items placed on or against them. Pay particular attention
to cords at plugs, wall outlet, and the point where they exit from your
HD-Ready TV.
L
IGHTNING
To protect your HD-Ready TV from a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system.
This will prevent damage to your HD-Ready TV from lightning and
power line surges.
P
OWER LINES
Do not locate an outside antenna system in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall
onto or against such power lines or circuits. When installing an
outside antenna system, take extreme care to keep from touching
such power lines or circuits because contact with them might be fatal.
O
VERLOADING
Do not overload wall outlets and extension cords because this can
result in a risk of fire or electric shock.
O
UTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to your
HD-Ready TV, make sure that the antenna or cable system is
grounded to provide some protection against voltage surges and
built-up static charges, Section 810 of the National Electrical Code
(NEC), ANSI/NFPA 70, provides information with respect to correct
grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
1
2
1
Electric service equipment
Power service grounding electrode system
www.insignia-products.com
7
6
5
4
3
2
3