Advertisement
DIMENSIONAL DRAWING
S
5
29.75
FRONT
14.85
2X HANDLE
BACK
R 23.28
2X INPUT
.59
5.28
.73
4.00
3.00
6.96
17.18
509070 (A)
509070 (A)
8/31/99
Manufacturing tolerances are +/- 0.13 and +/- 1°
One Main Street, Whitinsville, MA 01588
EAW products are continually improved. All specifications are therefore subject to change without notice.
GRILLE PARTIALLY
SHOWN
2X HANDLE
8.61
.59
SIDES
508 234 6158
Toll Free 800 992 5013
SPECIFICATIONS SM15
A & E SPECIFICATIONS
The two-way full range loudspeaker system shall incorporate a
15-in neodymium LF transducer and a 3-in voice coil/1.4-in
exit neodymium compression driver. Powering mode is bi-
amplified.
The LF driver shall be mounted in a vented enclosure tuned for
optimum low frequency response. The HF driver shall be
loaded on a constant directivity horn with a nominal coverage
pattern of 40° (h) x 60° (v).
System frequency response shall vary no more than ±3 dB from
75 Hz to 17 kHz measured on axis. The LF shall produce a
Sound Pressure Level (SPL) of 98 dB SPL on axis at 1 meter
with a power input of 1 Watt, and the HF shall be capable of
producing an output of 110 SPL on axis at 1 meter with a
power input of 1 Watt. The LF shall handle 800 Watts of ampli-
fier power (continuous) and the HF shall handle 200 Watts of
amplifier power. Both shall have a nominal impedance of 8
Ohms.
The loudspeaker enclosure shall be irregularly triangular in
shape with its baffle angled up 53°. It shall be constructed of
multi-ply, void-free cross-grain-laminated Baltic birch ply-
wood and shall employ extensive internal bracing. It shall be
finished in wear-resistant textured black paint. Input connec-
tors shall be 4x Neutrik NL4 Speakon (2 per side). The front
of the loudspeaker shall be covered with a powder coated per-
forated steel grille backed with open cell foam to protect
against dust.
The two-way full range loudspeaker shall be the EAW model
SM15.
FAX 508 234 8251
SM15/2 pp
info@eaw.com
www.eaw.com
October 2001
Printed in USA
Advertisement
