Setting Up The Monitor; Installing The Monitor Base - HP W2408 - 24" LCD Monitor User Manual

3

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.

Installing the Monitor Base

CAUTION:
uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its
normal condition.
1. Lift the monitor from its box and place it face down on a flat surface covered by a soft, clean cloth.
2. Press the base onto the pedestal (1) and secure it with the screw provided (2).
Figure 3-1
4 Chapter 3 Setting Up the Monitor
Do not touch the surface of the LCD panel. Pressure on the panel may cause non-
Installing the Monitor Base
ENWW