HP W2408 - 24" LCD Monitor User Manual page 26

Table 4-2 OSD Menu (continued)
Icon
20 Chapter 4 Operating the Monitor
Main Menu Submenu
Default Video Input
Information
Current Settings
Recommended
Settings
Serial Number
Version
Backlight Hours
Service Support: http://
www.hp.com/support
Factory Reset
Exit
Description
Selects the default or primary video input signal when
the monitor is connected to two active and valid video
sources. The monitor will automatically determine the
video format. The default input selection is DVI.
Analog — VGA — Selects VGA input.
Digital — DVI — Selects DVI input.
Selects and displays important information about the
monitor.
Provides the current input video mode.
Provides the recommended resolution mode and
refresh rate for the monitor.
Reports the serial number of the monitor. The serial
number is needed if contacting HP technical support.
Reports the firmware version of the monitor.
Reports the total hours of backlight operation.
Returns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.
Exits the OSD menu screen.
ENWW