HP W2408 - 24" LCD Monitor User Manual page 20

To use the auto-adjustment feature:
1. Allow the monitor to warm up for 20 minutes before adjusting.
2. Press the
●
●
3. Insert the CD in the disc drive. The CD menu is displayed.
4. Select Open Auto-Adjustment Software. The setup test pattern is displayed.
5. Press the
6. Press the
14 Chapter 4 Operating the Monitor
-/Auto button on the monitor front panel.
You can also press the
Refer to Adjusting the Monitor Settings on page 16
If the result is not satisfactory, continue with the procedure.
-/Auto button on the monitor front panel to produce a stable, centered image.
ESC key or any other key on the keyboard to exit the test pattern.
Menu button, then select Image Control from the OSD Main Menu.
in this chapter.
ENWW