HP D5063H - Pavilion F50 - 15" LCD Monitor User Manual page 14

3 Press the 'Select' button to select and execute the
Auto Setup function. After the execution of the
Auto Setup function, it will show the follow
message:
If the image looks correct, choose Yes.
Or
If the image requires further adjustment, choose
No, and the 'Phase' bar will show. Then you can
adjust Phase by using the '+' or '—' buttons. When
all text appears focused and there is no instability
in the image, press the 'Select' button to end the
adjustment.
10
user's guide
Adjusting the "Management"
Submenu
To perform the adjustment in the "Management"
submenu you should follow the steps below:
1 Press the 'Select' button to show the OSD "Main
Menu".
2 Use the '+' or '—' button to move (forward
or backward) to the management icon and
highlight it.
3 Press the 'Select' button to enter the
"Management" Submenu. It will show four items
for your further adjustment.
If 'Brightness' is selected, you may use the '+' or
'—' buttons to adjust the setting of brightness. The
fullness of the graphic bar as well as the numerical
value at the right corner is changed accordingly.