Displaying The Osd "Main Menu; Selecting Items In The Osd Menu; Changing Settings By Using The Osd Menu - HP D5063H - Pavilion F50 - 15" LCD Monitor User Manual

15-inch/38.1-centimeter viewable image
Hide thumbs Also See for D5063H - Pavilion F50 - 15" LCD Monitor:
Table of Contents

Advertisement

Displaying the OSD “Main Menu”
You can use the OSD features to change the screen
settings of your display. To display the OSD “Main
Menu”, press the ‘Select’ button.
The following table briefly describes each of the
items in the OSD “Main Menu”.
Item
Description
Automatically adjust the display
settings by using this “Auto Setup”
Auto
icon. See “Using Auto Setup“ on
page 9.
Open the “Management” submenu
where you can select Brightness,
Contrast or the image position for
Management
further adjustment. See “Adjusting
the “Management” Submenu“ on
page 10.
Open the “Clock/Phase” submenu
where you can select Clock or
Phase for further adjustment. See “
Clock/Phase
Adjusting the “Clock/Phase”
Submenu“ on page 12.
Open the “Color” submenu where
you can select Color Temperature,
Color
RGB and Black Level for further
adjustment. See “Adjusting the
“Color” Submenu“ on page 12.
Open the “OSD Display” submenu
where you can select H. position or
V. position of the OSD display for
OSD Display
further adjustment. See “
Adjusting the “OSD Display”
Submenu“ on page 14.
Recall factory-setting values back.
Factory Recall
See “Adjusting the Factory Recall“
on page 14.
Open the “Languages” submenu
where you can select one of the five
languages for your preference in
Languages
display OSD messages. See
“Selecting Language for Your
Preference” on page 15.
Exit
Close and exit the OSD main menu.

Selecting Items in the OSD Menu

To select items in the OSD “Main Menu”, you will
use the ‘+’ (plus) or ‘—’ (minus) buttons on the front
panel of the monitor to highlight the item, then you
will press the ‘Select’ button.
To select items in the OSD submenus, you will use all
three control buttons. To select a specific submenu,
you use the ‘+’ or ‘—’ buttons to move forward or
backward to the item to be adjusted, and then select
it by pressing the ‘Select’ button.
Changing Settings by
using the OSD Menu
Using Auto Setup
You can easily optimize the screen performance for
the monitor VGA interface by using the Auto button
and the auto-adjustment pattern software on the
CD-ROM disc that came with the monitor.
To perform the Auto Setup using the Auto button,
you should follow the steps below:
1 Insert the CD-ROM disc into a drive on the PC.
2 Run the software file Adjustment Pattern.exe
(from the CD-ROM drive) to display a setup test
pattern.
3 Press the ‘Auto’ button (by pressing the ‘—’
button when the OSD “Main Menu” is not shown)
to produce a stable, centered image.
To perform the Auto Setup function by using the
Main Menu, you should follow the steps below:
1 Press the ‘Select’ button to show the OSD “Main
Menu”.
2 The ‘Auto’ icon should be highlighted already.
Page 9

Advertisement

Table of Contents
loading

Table of Contents