EPSON Stylus COLOR 680/777/777i
n
After assembling the Waste drain ink pad unit, be sure to set the
some cables in the cable hook in the Waste drain ink pad unit.
Refer to the Figure 4-13.
n
When assembling the Waste drain ink pad unit, be sure to set the
tip of the waste ink tube in the suitable position of the Waste
drain ink pad. Refer to the Figure 4-14.
Waste drain ink pad
Figure 4-14. Drain ink tube setting position
When the Waste drain ink pad is replaced with a new one,
following service item is required.
n
Waste drain ink counter reset operation.
n
Tightening torque for screw
• C.B.P-TITE 3x8 screw for Waste drain ink pad unit
Disassembly and Assembly
.
Ink tube
: 9+/1 kgf.cm
Disassembly
Revision B
74