EPSON Stylus COLOR 680/777/777i
4.2.7 LD Roller removal
1.
Remove the Housing from the printer. (Refer to Section 4.2.1.)
2.
Take the Head FFC off from the Head FFC holder located along the LD roller
shaft holder.
Figure 4-20. Taking Head FFC out from the FFC holder
Disassembly and Assembly
Head FFC holder
LD roller shaft holder
3.
Remove two screws (C.B.S 3x6 F/Zn) securing the LD roller holder to the Main
frame.
Figure 4-21. Removing two screws securing the LD roller holder
Disassembly
Revision B
C.B.S 3x6 F/Zn screws
79