Installing A Serial Port Adapter; Serial Port Adapters - Dell GX620 - 3.6GHz Desktop 1GB RAM 80GB Windows XP SFF User Manual

Lower the card retention latch and press it into place.
6
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it
into the computer.
Replace the computer
7
Uninstall the card's driver. See the documentation that came with the card for instructions.
8
If you removed a sound card:
9
Enter system setup, select Audio Controller, and change the setting to On.
a
Connect external audio devices to the audio connectors on the computer back panel.
b
If you removed a network adapter card,
10
change the setting to On.

Serial Port Adapters

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity
from your body before you touch any of your computer's electronic components. You can do so by
touching an unpainted metal surface on the computer chassis.
NOTE:
The serial port adapter for your computer also includes two PS/2 connectors.

Installing a Serial Port Adapter

Follow the procedures in
1
Gently push the release tab on the adapter retention latch.
2
Remove the filler bracket (if applicable).
3
NOTE:
See the documentation that came with the adapter for information on configuring the adapter,
making internal connections, or customizing it for your computer.
Place the serial-port adapter bracket in the connector and press down firmly. Ensure that the
4
adapter is fully seated in the slot.
Gently press the adapter retention latch to secure the adapter bracket.
5
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can prevent
the computer cover from closing properly or cause damage to the equipment.
cover.
enter system
"Before You Begin."
setup, select Network Controller, and
139