Dell GX620 - 3.6GHz Desktop 1GB RAM 80GB Windows XP SFF User Manual page 132

If you are installing a new card, remove the filler bracket to create an empty card-slot opening.
4
If you are replacing a card that is already installed in the computer, remove the card. If necessary,
disconnect any cables connected to the card. Grasp the card by its corners, and ease it out of its
connector.
NOTE:
internal connections, or customizing it for your computer.
Prepare the new card for installation.
5
CAUTION:
network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet
before installing any cards.
Press the release tab to raise the card retention latch.
6
1
Insert the card firmly into the card connector on the riser-card cage.
7
132
See the documentation that came with the card for information on configuring the card, making
Some network adapters automatically start the computer when they are connected to a
1 release tab
2 card retention latch
3 card
2
4 card-edge connector
5 card connector
3
4
5