Disabling Or Enabling The Touch Pad; Connecting An External Device - Toshiba X870-BT2G23 User Manual

NOTE

Disabling or enabling the touch pad

The touch pad is enabled by default. To enable/disable the touch
pad, do one of the following:
❖
Press the touch pad ON/OFF (
❖
Press
touch pad" on page
NOTE

Connecting an external device

NOTE
You can easily attach an external device your computer.
To do this:
1 Read the directions that came with the device to see if you first
need to install new software.
2 Connect the device's video or USB cable to the port on the
computer and to the device.
3 Connect the device's power cable to a live electrical outlet
(if applicable).
4 Turn on the external device (if applicable).
Your computer may automatically detect the external device.
Touch pad setting options vary by computer model. The touch pad
settings are accessible through the Mouse Properties option of the
Windows Control Panel. For more information, please visit
www.support.toshiba.com, and enter the phrase "Mouse pointer
jumps around as you type" into the Search field.
F5 . For more information, see
Alternately, you can disable only the tapping feature. If you disable
tapping only, you can still use the touch pad's control buttons and
move the pointer by sliding your finger on the touch pad. To disable
tapping only, use the Mouse Properties option in the Windows
Control Panel.
Depending on your system, some models may include USB 3.0
port(s). To distinguish these ports, please look for the blue inset
within the USB 3.0 port (if available).
Getting Started
Using the touch pad
) button.
"Disabling or enabling the
172.
77
®