Sony Walkman NWZ-S716F Operation Manual page 116

11
11
Troubleshooting
Connection with a computer
Symptom
The player is not
recognized by the
computer when it is
connected to the
computer.
Data cannot be
transferred to the player
from your computer.
(continued)
Cause/Remedy
 The USB cable is not connected to a USB port on
your computer properly.
 Disconnect the USB cable, and then reconnect it.
 A USB hub is being used.
 Connecting the player via a USB hub may not
work. Connect the player to your computer using
the supplied USB cable.
 The USB port on your computer may have a
problem. Connect the player to another USB port on
your computer.
 Transferring may be stopped due to noise such as
static electricity, etc. This happens to protect data
information.
 Disconnect the player, then reconnect it.
 If you transfer files by dragging and dropping on
some computers that do not have Windows Media
Player 11 installed, there may be limited files (AAC,
video files, etc.) that can be transferred by dragging
and dropping.
 Install Windows Media Player 11 from the
supplied CD-ROM, then transfer files by dragging
and dropping again. Before installing the supplied
Windows Media Player 11 on your computer,
make sure to check whether your software or
service corresponds to Windows Media Player 11.
For details on usage, or support on Windows
Media Player, visit the following web site:
http://support.microsoft.com/
 The USB cable is not connected to a USB port on
your computer properly.
 Disconnect the USB cable, and then reconnect it.
Continued 