Sony Walkman NWZ-S716F Operation Manual page 11

11
11
 Headphone jack
For connecting the headphones.
Insert the jack pin until it clicks into
place. If the headphones are
connected improperly, the sound
from the headphones may not sound
right.
About the Noise Canceling function
The Noise Canceling function is
available only when using the
supplied headphones.
The supplied headphones can only
be used for these models, and cannot
be used for other equipment.
 Strap hole
This is used to attach a strap (sold
separately).
 HOLD switch
You can protect the player against
accidental operation by using the
HOLD switch when carrying it. By
sliding the HOLD switch in the
direction of the arrow , all
operation buttons are disabled. If you
slide the HOLD switch to the
opposite position, the HOLD
function is released.
 Display
The display may vary, depending on
functions (  page 12).
 VOL +*
2
Adjusts the volume.
/– button
 OPTION/PWR OFF button*
Displays the option menu (  page
19).
If you press and hold the OPTION/
PWR OFF button, the screen turns
off and the player enters the standby
mode. If you press any button while
the player is in the standby mode,
the "Now Playing" screen, etc.,
appears and the player is ready for
operation. Furthermore, if you leave
the player in the standby mode for
about a day, the player turns
completely off automatically. If you
press any button when the player is
turned off, the start up screen
appears first, then the "Now Playing"
screen appears.
Note
 The player consumes battery power very
slightly even when it is in the standby
mode. Therefore, the player might
turn completely off in a short time,
depending on the power remaining in
the battery.
Functions marked with
1
*
player are activated if you press and hold
the corresponding buttons.
There are tactile dots. Use them to help
* 2
with button operations.
1
on the