Table of Contents
Advertisement
1
1
Recording Files
Starting to Record Automatically in Response to
Sound – the VOR Function
You can set the VOR (Voice Operated Recording) function to "ON, " to make
the IC recorder start recording when the IC recorder detects sound that
exceeds a specified level, and pause when sound falls to a level lower than a
specified level.
In the stop or recording mode, press MENU/NOISE
CUT. Select the tab
ENT.
Press or to select "ON," and then press /ENT.
"VOR" is set to "OFF" when you purchase the IC recorder.
Press STOP to exit the menu mode.
Press REC/PAUSE.
"
When the IC recorder detects sound that falls below a specified level, the
"
When the IC recorder detects sound that exceeds a specified level during
the VOR recording pause, the VOR recording starts again.
To cancel the VOR function
Set "VOR" to "OFF" in step .
Notes
The VOR function is affected by the sound around you. Set "Mic Sensitivity"
in the menu according to the recording conditions. If recording is not
satisfactory after you have changed the "Mic Sensitivity" setting, or for an
important recording, set "VOR" to "OFF" in the menu.
During synchronized recording ( p. 33), the VOR function does not work.
"VOR," and then press /
" appears in the display window.
" flashes, and the VOR recording pauses.
STOP
REC/PAUSE
/ENT
MENU/NOISE CUT
,
Advertisement
Table of Contents
