Advertisement
Quick Links
WARNING
GB
Do not expose the batteries (battery pack or batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
IC Recorder
Dispose of used batteries according to the instructions.
Quick Start Guide
Capacity (User available capacity)
2 GB (approx. 1.80 GB = 1,932,735,283 Byte)
A part of the memory capacity is used as a management area.
Notice for the customers: the following information is only applicable to equipment sold in
the countries applying EU directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075
Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please
refer to the addresses given in separate service or guarantee documents.
To prevent possible hearing damage, do not listen at high volume levels for long
periods.
ICD-UX502
4-416-975-11(1)
© 2012 Sony Corporation Printed in China
Welcome to your new Sony IC recorder!
This is the Quick Start Guide, which provides you with instructions on the
basic operations of the IC recorder.
Please read it carefully. We hope you enjoy using your new Sony IC recorder.
Check the supplied items.
IC Recorder (1)
Operating Instructions (Stored in the
Stereo headphones (1)
built-in memory)
USB connection support cable (1)
Quick Start Guide
LR03 (size AAA) alkaline battery (1)
Optional accessories
Electret condenser microphone ECM-CS10,
Battery charger BCG-34HSN
ECM-CZ10, ECM-CS3
Compact charger & 2-pc AAA Multi-Use
Rechargeable battery NH-AAA-B2KN
Premium batteries BCG-34HS2KAN
USB AC adaptor AC-U50AG
Let's try out your new IC recorder
1. Power on.
4. Record.
Insert a battery with the correct polarity.
Turn the power on.
Slide and hold the HOLD•POWER switch in the
direction of "POWER" until the window display
appears. The "Accessing... " animation is displayed,
and the IC recorder is turned on.
To turn the power off, slide and hold the HOLD•POWER
switch in the direction of "POWER" until "Power Off"
animation is displayed.
To prevent unintentional operations (HOLD)
5. Listen.
To release the IC recorder from the HOLD status, slide the
HOLD•POWER switch towards the center.
2. Set the date and time.
When you insert a battery for the first time, the "Set
Date&Time" animation appears, and then the year
section begins to flash.
Press or to set the year (the last two
digits of the year), and then press /
ENT. Repeat this procedure to set month,
day, hour, and minute in sequence.
When you set the minute and press /ENT, the
clock reflects the setting.
6. Erase.
3. Select the menu language.
Press MENU/NOISE CUT.
Press , press or to select
, and
then press /ENT.
Press or to select "Language, " and
then press /ENT.
Press or to select the language that
you want to use in the display window,
and then press /ENT.
You can select the following languages:
Deutsch (German), English, Español (Spanish),
Français (French), Italiano (Italian), Русский
(Russian)
Press STOP.
What to do next
Congratulations! You have set up your IC recorder and enjoyed your first recording. Let's step
up to the next stage. There are some more useful functions and information that you can use to
Before you start using the IC recorder, make sure that you
fully utilize your IC recorder.
slide the HOLD•POWER switch towards the center to release
Operation
the HOLD status.
Selecting a tab/folder/file
indicator
Press REC/PAUSE.
Recording starts and the operation indicator lights
in red.
You can select a tab and a folder in which you
You can pause recording by pressing REC/PAUSE.
are going to record a file. You can also specify
Press REC/PAUSE again to restart recording.
the file to be played back or erased in the
selected folder.
Press STOP to stop recording.
Select a tab.
Recording stops and the operation indicator
1.
flashes in orange.
Press
to display the folder
selection window.
Press /ENT.
Playback starts and the operation indicator lights
2.
Press and press or to select
Operation
in green.
indicator
a tab, and then press /ENT.
The folder selection window of the
Adjust the volume by pressing VOL –/+.
selected tab is displayed.
(Voice): Recordable area to be used
Press STOP to stop playback.
to manage files recorded with the IC
recorder.
(Music): Playback-only area to be used
to manage music files transferred from
your computer.
Copying the operating instructions to your
computer
Once a file is erased, you cannot restore it.
Press ERASE.
"Erase?" is displayed and the file to be erased is
played back for confirmation.
Select "Execute" using or , and then
press /ENT.
The operating instructions explaining all the
The "Erasing..." animation is displayed while the
features and functions of the IC recorder are
selected file is being erased.
stored as PDF files in the built-in memory of
the IC recorder.
You can also download the operating
instructions from the Sony support home page:
http://support.sony-europe.com/DNA
Connect the IC recorder to your
computer.
Open the "Instructions" folder on
your computer.
More advanced features
For details on each operation, refer to the
Scene selection
PDF operating instructions copied to your
You can select the menu items for recording
computer.
to the most appropriate settings according to
various recording scenes.
NOISE CUT
(Podcast): Playback-only area to be
used to manage podcast files transferred
Reduces ambient noise to make the playback
from your computer.
sound clearer.
T-MARK
Select a folder.
Adds a track mark to set the starting point
Press or to select a folder, and then
DPC(SPEED
when recording or playing back a file.
press /ENT.
CTRL)
To display the files contained in the
DPC(SPEED CTRL)
T-MARK
selected folder, press .
Adjusts the playback speed.
MENU/
MENU
Select a file.
NOISE CUT
Sets various menu items, such as REC Mode,
When the file selection window is
Mic Sensitivity, etc.
displayed, press or to select the
desired file, and then press /ENT.
Sound Organizer (PC application
software*)
Various operations can be performed using
Sound Organizer on your computer. You can
When the stop mode window is
import files recorded with the IC recorder
into Sound Organizer to edit. You can import
displayed, you can switch files by
pressing and .
music files of a music CD or podcast files to
transfer to the IC recorder. You can also burn
CDs of the music you like.
* Not supplied/for Windows only
You can download the Sound Organizer from
the Sony support home page:
http://support.sony-europe.com/DNA
On Windows: Click [My Computer]
or [Computer] - [IC RECORDER]
Precautions
- [Instructions].
On Macintosh: Click [IC RECORDER] on
the finder - [Instructions].
On power
Should any solid object or liquid fall into
Drag and drop the files of the
Operate the unit only on 1.5 V or 1.2 V DC.
the unit, remove the battery and have the
Use an LR03 (size AAA) alkaline battery or an
unit checked by qualified personnel before
operating instructions from the
NH-AAA rechargeable battery.
operating it any further.
"Instructions" folder to the local
disk on your computer.
On safety
If you have any questions or problems
The file names of the operating
Do not operate the unit while driving, cycling
concerning your unit, please consult your
or operating any motorized vehicle.
instructions are as follows:
nearest Sony dealer.
Product name_language name_version.
On handling
pdf (e.g. ICD-UX502_English_111.pdf )
Do not leave the unit in a location near
heat sources, or in a place subject to direct
Disconnect the IC recorder from
sunlight, excessive dust or mechanical
your computer.
shock.
To read the operating instructions, double-click
the PDF file you want to read.
Advertisement
