Sony Reader PRS-T2 User Manual page 35

Note
 Do not set the Reader to data transfer mode while
downloading via a wireless connection.
 Your computer must be turned on to charge the Reader.
The Reader will not be charged if your computer enters
sleep mode or standby mode. Keep your computer turned
on with a stable and continuous power supply while
charging the Reader.
 The (Power) button cannot be used when the Reader is
connected to your computer and charging.
 If you turn off the Reader by tapping [Settings]
Shutdown] while in charging mode, the Reader will stop
charging.
Tip
 You can also charge the Reader using the AC Adapter
(PRSA-AC10/PRSA-AC1A, sold separately). This method of
charging will take approximately 2 hours to fully charge
the battery.
 To change from charge mode to data transfer mode, tap
the status bar to display the notification window
[USB connected]
Table of Contents
[Yes].

Battery
[Device

tap

35