Sony Reader PRS-T2 User Manual page 238

Avoiding water and moisture
 Note that condensation may form temporarily in cases
such as when the player is moved quickly from a low-
temperature environment to a high temperature
environment or used in a room that has a heater just
turned on. Condensation creates a phenomenon where
moisture in the air adheres to surfaces such as metal
panels, etc., and then changes to liquid. If condensation
forms in the Reader, leave it turned off until the
condensation disappears. If you use the Reader with
condensation present, a malfunction may result.
 The Reader is not waterproof. Remember to follow the
precautions below.
 Be careful not to drop the Reader into a sink or other
container filled with water.
 Do not use the Reader in humid locations or bad weather,
such as in the rain or snow.
 Do not get the Reader wet.
If you touch the Reader with wet hands, or put the
Reader in a damp article of clothing, the Reader may
get wet and this may cause a malfunction.
Charging the Reader
 Heat may build up in the Reader while charging, or if it is
used for an extended period of time.
Table of Contents
Precautions
238