Sharp MX-B400P Software Setup Manual page 39

When the PPD driver is installed
1
Click the [Start] button (
[Printer].
• In Windows 7, click the [Start] button and then click [Devices and Printers].
• In Windows XP/Server 2003, click the [start] button and then click [Printers and
Faxes].
• In Windows 98/Me/NT 4.0/2000, click the [Start] button, select [Settings], and
then click [Printers].
If [Printers and Faxes] does not appear in the [start] menu in Windows XP, click
the [start] button, click [Control Panel], click [Printers and Other Hardware], and
then click [Printers and Faxes].
2
Open the printer properties window.
(1) Right-click the printer driver icon of the machine.
(2) Select [Properties].
In Windows 7, select [Printer Properties].
3
Configure the printer driver for the options installed on the machine.
(1) Click the [Device Settings] tab.
In Windows 98/Me, click the [Device Options] tab.
(2) Configure each item based on the machine configuration.
The items and the procedures for configuring the items vary depending on the
operating system version.
(3) Click the [OK] button.
You can check the options that are installed on the machine by printing out the
"All Custom Setting List" in the system settings. (However, note that "Input Tray
Options" must be set to the number of trays on the machine.) The "All Custom
Settings List" can be printed from [List Print (User)] in the system settings.
INSTALLING THE PRINTER DRIVER
), click [Control Panel], and then click
37