Navigate To An Icon; Routes - Eagle FishElite 640c Installation And Operation Instructions Manual

1. Press
MENU
2. Press ↓ to
press .
ENT
The Delete All Icons confirmation message will appear. Press ← to
| . All icons will be deleted from the map.
Y ENT
ES
The Delete by Symbol command will launch the Select Symbol menu.
Select the desired icon symbol to delete and press
pears saying all icons with the selected symbol have been deleted.
The Delete From Map command will prompt you to move the cursor
over an icon to select it. After selecting the icon, press
pears from the map.

Navigate to an Icon

To execute the Navigate to Cursor command, use the cursor to select
the desired icon on the map.
1. Center cursor crosshairs on an icon.
2. To navigate to the icon press
on the Map Page or the compass bearing arrow on the Navigation Page.

Routes

A route is a series of waypoints, linked together in an ordered sequence
used to mark a course of travel. You can visualize a route as a string of
beads. The beads represent waypoints and the string represents the
course of travel connecting waypoint to waypoint.
The course from one waypoint to the next is a leg. Routes are composed
of one or more legs. The legs of all GPS routes are based on straight
lines between waypoints.
|↓ to
D M
ELETE
D A I
ELETE LL CONS
Delete icons menu.
| .
I ENT
Y CONS
,
D B S
ELETE Y
|
MENU ENT
121
or
D
YMBOL ELETE
. A message ap-
ENT
ENT
| . Follow the course line
EXIT
and
F M
ROM AP
and it disap-