Ipv6 Configuration; Activating Ipv6 - Samsung CLX-6260ND User Manual

IPv6 configuration

IPv6 is supported properly only in Windows Vista or higher.
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 5
overview" on page 33).
• If the IPv6 network seems to not be working, set all the network setting
to the factory defaults and try again using
The machine supports the following IPv6 addresses for network printing and
managements.
• Link-local Address: Self-configured local IPv6 address (Address starts with
FE80).
• Stateless Address: Automatically configured IPv6 address by a network
router.
• Stateful Address: IPv6 address configured by a DHCPv6 server.
• Manual Address: Manually configured IPv6 address by a user.
In the IPv6 network environment, follow the next procedure to use the IPv6
address.
or "Menu
Clear Setting.
10
From the control panel

Activating IPv6

• Accessing menus may differ from model to model (see "Accessing the
menu" on page 33).
• It may be necessary to press
some models.
1 Select (Menu) > Network > TCP/IP (IPv6) > IPv6 Activate on the
control panel.
Or select Setup> Machine Setup > Next > Network Setup > TCP/IP
(IPv6) > IPv6 Activate on the touch screen.
2 Select On and press OK.
Turn the machine off and turn it on again.
3
When you install the printer driver, do not configure both IPv4 and IPv6. We
recommend to configure either IPv4 or IPv6.
OK to navigate to lower-level menus for
2. Using a Network-Connected Machine
189