Samsung CLX-6260ND User Manual page 234

Fax
To change the menu options:
• Press (fax) > (Menu) > Fax Setup > Receiving on the control panel.
• Or press Setup > Machine Setup > Next > Default Setting > Fax Default
on the touch screen.
• Or press Setup > Machine Setup> Next > Fax Setup on the touch screen.
Item
Selects the default fax receiving mode (see "Changing
Receive Mode
the receive modes" on page 297).
Specifies the number of times the machine rings before
Ring To Answer
answering an incoming call.
Automatically prints the page number, and the date
Stamp RCV Name and time of reception at the bottom of each page of a
received fax.
Initiates fax reception from an extension phone
plugged into the EXT socket on the back of the
Rcv Start Code machine. If you pick up the extension phone and hear
fax tones, enter the code. It is preset to *9* at the
factory.
Automatically reduces an incoming fax page to fit the
Auto Reduction
size of the paper loaded in the machine.
Discards a specific length from the end of the received
Discard Size
fax.
Description
Item
Enables a user to use a single telephone line to answer
several different telephone numbers. You can set the
machine to recognize different ring patterns for each
DRPD Mode
number. This setting may not be available depending
on your country (see "Receiving faxes using DRPD
mode" on page 299).
Prints the received fax data on both sides of the paper.
You can save the paper usage.
• Off: Prints only one side of the paper.
Duplex Print
• Long Edge: Prints both sides of the paper; however,
the binding will be the long edge.
• Short Edge: Prints both sides of the paper; however,
the binding will be the short edge.
Description
234
3. Useful Setting Menus