Mounting The Unit: Bracket, In-Dash Or Portable - Eagle 480 Installation And Operation Instructions Manual

Fish-finding & depth sounding sonars
Table of Contents

Advertisement

CAUTION:
Do not use this product without a 3-amp fuse wired into the power
cable! Failure to use a 3-amp fuse will void your warranty.
This unit has reverse polarity protection. No damage will occur if the
power wires are reversed. However, the unit will not work until the
wires are attached correctly.
An optional 8-foot, CA-4 external power cable with a cigarette lighter
adapter is available from Eagle.
Power/trans-
ducer socket

Mounting the Unit: Bracket, In-Dash or Portable

You can install the sonar unit on the top of a dash with the supplied
gimbal bracket. It can also be installed in the dash or mounted on a
portable power supply.
To unit
Power connections for the sonar unit.
Sonar unit
rear view
Power cable
Transducer
cable
Sonar unit cable connections.
Optional power off switch for
saltwater installations
Black wire
12 volt
battery
26
Red wire with
3 amp fuse
Accessory socket
Accessory
cable

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fishmark 480Seafinder 480df - additional

Table of Contents