UsingTheShaver - Panasonic ES-LF51-A Operating Instructions Manual

Readinglampswhencharging
While charging
The charge status lamp ( ) glows.
The number of the battery
capacity lamp will increase as
charging progresses.
• After charging is completed, turning the power switch ON with
the shaver plugged in will cause all the lamps to light up and then
turn off after 5 seconds. This shows that the shaver is fully
charged.
• Recommended ambient temperature for charging is 5‑35 °C
(41‑95 °F). The battery may not charge properly or not at all
under extreme low or high temperatures.
The charge status lamp ( ) will blink when there is a problem
with charging.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp (
may not glow. It will eventually glow if kept connected.
After charging is completed
All the lamps will light up and
then turn off after 5 seconds.
)
Shave

Usingtheshaver

1
1 Rotatethelockringto
unlockthepowerswitch
andpressthepower
switch.
Page4
• We recommend using the shaver in an ambient temperature
range of 5 ‑ 35 °C (41 ‑ 95 °F). If used outside this range, the
appliance may stop operating.
Start out shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver back
and forth in the direction of your beard. You may gently increase
the amount of pressure as your skin becomes accustomed to
this shaver. Applying excessive pressure does not provide a
closer shave.
Caution
• If you press the power switch for more than  seconds, the
sonic vibration cleaning mode is activated.
You cannot shave in this mode.
• Do not place your fingers on the power switch while using the
shaver. This may cause the shaver to turn off or enter the sonic
vibration cleaning mode. Place your thumb on the thumb rest
while using the shaver.
2
2 Holdtheshaver
asillustrated
aboveandshave.
Page6
5