Loading And Playing A Disc - Dynex DX-PD510 Owner's Manual

PDF created with FinePrint pdfFactory Pro trial version
2. Remote Control View (Refer to Figure 3)
1) Setup Button
2) Up Button
3) Skip- Button
4) Enter Button
5) Reverse/Left Button
6) DOWN Buttons
7) Numeric Button
8) Display Button
9) Zoom Button
10) Subtitle Button
11) Skip+ Button
12) A-B Repeat Button
13) Forward/Right Keypad
14) 1/All Repeat Button
15) Stop Button
16) Menu Button
17) Audio Button
18) Pause Button
19) Play Button
F. Loading and Playing a Disc
a. After connecting power to the unit, power on "DVD player" with the
power switch. The power indicator will light.
b. Open the disc tray by pressing OPEN, and place a disc into the
tray with the label side facing up.
c. Close the tray by pressing the "Close" button.The unit will load the
disc and start playing.
d. Rotate BRIGHTNESS and VOLUME to adjust the LCD's bright-
ness and the DVD player's volume.
e. To stop playing a disc, press STOP.
Figure 3
8
http://www.fineprint.com